Shenzhen Rion Technology Co., Ltd.
Leading manufacturer of angle sensor, accelerometer, compass sensor, and so on
Add to Cart
★ Single / dual axis inclination measurement
★ Range ± 1～± 60° optional
★ Accuracy:0.005°
★ Wide voltage input 9 ～ 36V
★ Output mode 0～5V
★ IP67 protection
★ Wide temperature operation -40 ～ + 85 ℃
★ High vibration resistance> 2000g
★ Small size L90mm × W50mm × H34mm (customizable)
★ High resolution 0.001 °
★ Equipment vehicle leveling
★ Bridge and Dam monitoring
★ High-altitude platform safety protection
★ Angle control of medical equipment
★ Attitude navigation of underground drilling rig
★ Leveling of railway gauge and gauge
★ Direction measurement based on tilt angle
★ Tilt monitoring of geological equipment
★ Pitch angle measurement of directional satellite communication antenna
★ Mining machinery, oil drilling equipment
★ Equipment level control
★ Alignment control , curve control
▶ INTRODUCTION
HCA510T & HCA520T is a high-precision analog voltage output single / dual axis inclination sensor. The highest precision in a small range can reach 0.003 °. It is one of the few high-precision inclinometers in China. Its function is mainly used to measure the inclination of the object based on horizontal plane.
Built-in micro solid pendulum ,by measuring the static gravity field changes then convert into inclination change,the changes in mode output voltage (0-5V).The internal use high-resolution differential digital-to-analog converter, by the internal MCU system secondary linearity and temperature correction, the customer no need to do a secondary linearity correction, meanwhile also reducing the error caused by environmental changes on the accuracy of the product.
This product uses non-contact measurement principle, can real-time output current posture inclination,Simple to use, and no need to retrieve the relative changed surface to install.Latest MEMS higher technology production, high-precision, small size, strong resistance to external electromagnetic interference ability, the ability to withstand shock and vibration. It is the ideal choice for industrial equipment, platform measuring attitude!
| HCA510&520T | CONDITION | PARAMTERS | UNIT | ||
| Measure range |
| ±10 | ±30 | ±60 | ° |
| Measure axis |
| X / XY | X / XY | X / XY | axis |
| Zero output | 0° output | 2.5 | 2.5 | 2.5 | V |
| Resolution |
| 0.001 | 0.001 | 0.001 | ° |
| Measure accuracy | @25℃ | 0.005 | 0.01 | 0.02 | °(RMS) |
| Long term stability |
| 0.01 | 0.02 | 0.05 | ° |
| Zero Temp. coefficient | -40～85℃ | ±0.002 | ±0.002 | ±0.002 | °/℃ |
| Sensitivity temp. coefficient | -40～85℃ | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power on time |
| 0.5 | 0.5 | 0.5 | S |
| Response frequency |
| 20 | 20 | 20 | Hz |
| EMC | According to EN61000 and GBT17626 | ||||
| MTBF | ≥50000 hours/times | ||||
| Insulation Resistance | ≥100MΩ | ||||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||||
| Anti-vibration | 10grms,10～1000Hz | ||||
| Protection glass | IP67 | ||||
| Cables | Standard configuration: 1m length, wear-resistant, wide temperature, shielded cable 5*0.4mm2 aviation connector | ||||
| Weight | ≤250g(without cable ) | ||||
| PARAMETERS | CONDITION | MIN | STANDARD | MAX | UNIT |
| Power supply | Standard | 9 | 12,24 | 36 | V |
| Working current |
|
| 40 |
| mA |
| Output load | Resistive | 10 |
|
| kΩ |
|
| Capacitive |
|
| 20 | nF |
| Working temperature |
| -40 |
| +85 | ℃ |
| Store temperature |
| -40 |
| +85 | ℃ |
