
Add to Cart
HDA437T High-intensity impact scenario Dynamic Inclinometer MODBUS 9 axis output Sensor
▶ PRODUCT DESCRIPTION
HDA436T/HDA437T A new generation of digital MEMS dynamic tilt sensor launched by RION Technology. It can measure the attitude parameters (roll, pitch, and azimuth) of a moving carrier, and suitable for tilt angle measurement under motion or vibration.
▶ SPECIFICATIONS
HDA436T | CONDITION | INDEX | |
Measure range | - | Roll ±180°, pitch ±90°, azimuth ±180° (initial value at power-down is 0°) | |
Measure axis | - | X axis / Y axis / Z axis | |
Resolution | - | 0.01° | |
Static accuracy | @25℃ | ± 0.05° | |
Dynamic accuracy(RMS) | @25℃ | ± 0.1° | |
Gyro | range | - | ±250°/s |
Zero bias stability (10s mean) | - | 8.5°/h | |
Zero Bias Instability(allan) | - | 4.5°/h | |
Angle random walk coefficient(allan) | - | 0.25°/sqrt(h) | |
Acceleration | range | - | ±8g |
Bias stability(10s mean) | - | 0.02mg | |
Bias instability(allan) | - | 0.005mg | |
Speed random walk coefficient(allan) | - | 0.005m/s/sqrt(h) | |
Zero point temp. coefficient | -40~85℃ | ±0.01°/℃ | |
Sensitivity temp. coefficient | -40~85℃ | ≤100ppm/℃ | |
Power-on startup time | 1S | ||
Response time | 0.01S | ||
Output signal | RS485/RS232/TTL | ||
Electromagnetic compatibility | According to EN61000 and GBT17626 | ||
MTBF | ≥ 98000 hours / time | ||
Insulation resistance | ≥100 Megohm | ||
Impact resistance | 100g @ 11ms,3 axial direction (half sinusoid) | ||
Anti-vibration | 10grms,10~1000Hz | ||
Waterproof level | standard configuration: IP67 optional configuration: IP68 or IP68 with anti-corrosion cable | ||
Cable | Standard without wiring, optional 2m M12 aviation plug with PVC unshielded cable | ||
Weight | ≤165g (excluding cables) |
▶ ELECTRICAL PARAMETERS
PARAMETER | CONDITION | MIN | TYP | MAX | UNIT | |
Supply voltage | standard | 9 | 12 | 24 | 36 | V |
Working current | without load | 60mA(12V) | mA | |||
Operating temp | -40 | +85 | ℃ | |||
storage temp | -40 | +85 | ℃ |
|