Shenzhen Rion Technology Co., Ltd.
Leading manufacturer of angle sensor, accelerometer, compass sensor, and so on
Add to Cart
HCM380B ROV 3D Electronic Compass Underwater Robot Roll Pitch Heading Sensor
PRODUCT DESCRIPTION
HCM380B / HCM385B is a high-precision 3D compass sensor, and the protection reaches IP67 level. Using advanced hard and soft iron calibration algorithms, make any tool surface with a roll angle of 360 ° can still provide high-precision heading information. With the characteristics of small size and low power consumption, it is more suitable for today's miniaturized sensitive measurement systems. The product can be ordered with a complete sealed casing or a circuit board.
HCM380B / HCM385B integrates three-axis magnetic flux gate technology. It uses a central processing unit to calculate heading data in real time, and uses a three-axis accelerometer to compensate for a wide range of tilt angles. HCM380B / HCM385B has been widely used in many fields such as stable antennas, vehicles, and system integration.
KEY FEATURES
▶ KEY FEATURES
★ Tilt accuracy: <0.1 °
★ Standard RS232 / RS485 / TTL output interface
★ Azimuth accuracy: 0.5 °
★ Tilt resolution: Reference performance index
★ Wide temperature range: -40 ℃ ～ + 85 ℃
★ Rolling angle measurement range: ± 180 °
★ With hard magnetic, soft magnetic and tilt compensation
▶ APPLICATION
★ Satellite Antenna Searching
★ Navigation Navigation Mapping
★ Infrared imager
★ GPS Integrated Navigation
★ Antenna Servo Control
★ Oceanographic Tester
★ Laser rangefinder
★ Map complementer
★ ROV underwater robot navigation
★ Special occasion robot
TECHNICAL DATA
| HCM380B/HCM385B Parameters | ||
| Compass heading | Best heading accuracy | 0.5° |
| Resolution | 0.1° | |
| Compass tilt angle | Pitch accuracy | 0.1°<15°(Measure range ) |
| 0.1°<30°(Measure range) | ||
| 0.1°<60°(Measure range) | ||
| 0.2°<90°(Measure range) | ||
| Pitch measure range | ±85° | |
| Roll accuracy | 0.1°<15°(Measure range) | |
| 0.1°<30°(Measure range) | ||
| 0.1°<60°(Measure range) | ||
| 0.2°<180°(Measure range) | ||
| Roll measure range | ±180° | |
| Resolution | 0.1° | |
| Calibration | Hard iron calibration | Yes |
| Soft iron calibration | Yes | |
| Soft Magnetic field interference calibration method | Horizontal rotation 360 °; vertical rotation (optional) | |
| physical characteristics | Dimension | L49×W57×H25.5mm |
| Weight | 210g(without cable) | |
| RS232/RS485/TTL interface | Direct leading cable | |
| Interface characteristics | Start delay | <50ms |
| Max output | 20Hz/s | |
| Communication rate | 2400 ~115200baud | |
| Output format | Binary high performance protocol | |
| Power supply | Power voltage | (default)DC+5V |
| Current (max) | 30mA | |
| Idea mode | 26mA | |
| Sleep mode | TBD | |
| Environment | Working temperature | -40℃～+85℃ |
| Storage temperature | -40℃～+85℃ | |
| Anti vibration performance | 100g | |
| Protective performance | IP67 | |
| Electromagnetic compatibility | According to EN61000 and GBT17626 | |
| MTBF | ≥40000 hours/time | |
| Insulation resistance | ≥100 Mega ohm | |
| Impact resistance | 100g@11ms,3 Axial Direction (Half Sinusoid) | |
| Anti vibration | 10grms,10～1000Hz | |
PRODUCT SIZE
▶ PCBA BOARD SIZE
▶ SHELL SIZE