Shenzhen Rion Technology Co., Ltd.
Leading manufacturer of angle sensor, accelerometer, compass sensor, and so on
Add to Cart
Precise tilt angle measure for bridge, biaxial angle sensor for bridge building inclination angle measure
▶ APPLICATION
★ Bridge & dam detection
★ Wind turbines angle measure
★ Engineering vehicles automatic leveling
★ Laser equipment position
★ Medical facilities angle control
▶ FEATURES
★ Single / dual axis inclination measurement
★ Measuring Range :±1～±60° optional
★ Size:L92×W48×H36mm
★ Wide voltage input: 9～36V
★ Wide temperature working: -40～+85℃
★ IP67 protection grade
★ High Resolution: 0.001°
★ Water-proof air-plug
★ Highly anti-vibration performance >2000g
★ Output mode CAN 2.0A are optional
▶ TECHNICAL DATA
| ACA616T&626T-C2 | CONDITIONS | PARAMETERS | UNIT | ||
| Measure range | ±10 | ±30 | ±60 | ° | |
| Measure axis | X/XY | X/XY | X/XY | AXIS | |
| Resolution | 0.001 | 0.001 | 0.001 | ° | |
| Measure accuracy | @25℃ | 0.003 | 0.01 | 0.02 | ° |
| Long term stability | 0.01 | 0.02 | 0.03 | ° | |
| Zero Temp. coefficient | -40~+85℃ | ±0.0004 | ±0.0004 | ±0.0004 | °/℃ |
| Sensitivity temp-coeffi | -40~+85℃ | ≤100 | ≤100 | ≤100 | ppm/℃ |
| Power on time | 0.5 | 0.5 | 0.5 | S | |
| Response time | 0.02 | 0.02 | 0.02 | S | |
| Interface type | CAN 2.0A | ||||
| EMC | According to EN61000 and GBT17626 | ||||
| MTBF | ≥50000 hours/times | ||||
| Insulation Resistance | ≥100MΩ | ||||
| Shockproof | 100g@11ms,3 Axial Direction (Half Sinusoid) | ||||
| Anti-vibration | 10grms,10～1000Hz | ||||
| Protection grade | IP67 | ||||
| Cables | Standard configuration: 2m length, wear-resistant, wide temperature, shielded cable 5P * 5.7mm aviation connector | ||||
| Weight | 235g(without cable) | ||||
▶ GENERAL DESCRIPTION
ACA616T is a full-temperature compensated high-precision single / dual-axis inclinometer developed by RION Technology on the basis of high-precision inclination platform. Its good temperature stability can be used in a wide temperature environment of -40 ~ 85℃ In addition, the system has a built-in high-precision 24it A / D converter, and through a 5-level conversion algorithm, it can measure the tilt and pitch angle of the sensor output relative to the horizontal plane. Output protocol CAN2.0A.
The characteristics of non-contact installation make this product have good system integration. Just fix the sensor on the surface of the measured object with a screwdriver, the attitude and inclination of the object can be automatically calculated. It has strong ability to withstand shock and vibration, and has a great competitive advantage among domestic counterparts. It is specifically aimed at the industrial fields that high-end users require.
