Add to Cart
AKF392 USB MEMS 3 Axis Accelerometer Sensor Auto Monitoring
● crash record, fatigue monitoring and prediction
● wind power generation
● Low frequency vibration and automatic monitoring
● automobile
● Large machinery, engine
● armamentarium
● bridge
● road roller
| Range | ±2 | ±4 | ±8 | ±10 | ±20 | ±40 | g | ||||||
| Deviation Calibration | <1 | <1 | <1 | <1 | <1 | <1 | mg | ||||||
| Measuring Axial | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | X,Y,Z | axis | ||||||
| Up/Off Power Repeatability | <2 | <2 | <2 | <2 | <2 | <2 | mg(max) | ||||||
| Deviation temperature coefficient | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 | %/℃ (Typical value) | ||||||
| Resolution/Threshold (@ 1Hz) | < 1 | < 1 | < 1 | < 1 | < 1 | < 1 | mg(max) | ||||||
| Nonlinearity | <0.5 | <0.8 | <1 | <1 | <1 | <1 | % FS(max) | ||||||
| Frequency response | 2.4 | 2.4 | 2.4 | 5.5 | 5.5 | 5.5 | kHz | ||||||
| Bandwidth (3Db)) | 500 | 500 | 500 | 500 | 500 | 500 | Hz | ||||||
| Cross-axis sensitivity | 1 | 1 | 1 | 2 | 2 | 2 | % | ||||||
| Lateral vibration sensitivity ratio | 1 | 1 | 2 | 5 | 5 | 5 | % | ||||||
| Resonance frequency | 2.4 | 2.4 | 2.4 | 5.5 | 5.5 | 5.5 | kHz | ||||||
| noise density | 21 | 21 | 21 | 86.6 | 86.6 | 86.6 | μg/√Hz | ||||||
| 0g output 2.5V | <0.01 | <0.01 | <0.01 | <0.008 | <0.008 | <0.008 | mV | ||||||
| Output rate | 5Hz,10Hz,25Hz,50Hz,100Hz,200Hz,500Hz,1000Hz | | | | | | | ||||||
| Output interface | RS232/RS485/TTL | | | | | | | ||||||
| Protocol | Rion Standard Protocol And Modbus Rtu Protocol | | | | | | | ||||||
| Reliability | MIL-HDBK-217,Grade 2 | | | | | | | ||||||
| Shock Resistance | 100g@11ms,Triaxial And Identical (Half Sine Wave) | | | | | | | ||||||
| Recovery Time | <1ms(1000g, 1/2 Sin 1ms,Shock Acting On The i Axis) | | | | | | | ||||||
| Vibrate | 20g Rms,20~2000Hz (Random Noise ,o ,p,i Per Axis For Action 30 Minutes | | | | | | | ||||||
| Reliability | MIL-HDBK-217,Grade 2 | | | | | | | ||||||
| Shock Resistance | 100g@11ms,Triaxial And Identical (Half Sine Wave) | | | | | | | ||||||
| Input(Vdd_Vss) | 9-36 VDC | | | | | | | ||||||
| Recovery Time | <1ms(1000g, 1/2 Sin 1ms,Shock Acting On The i Axis) | | | | | | | ||||||
| Vibrate | 20g Rms,20~2000Hz (Random Noise ,o ,p,i Per Axis For Action 30 Minutes ) | | | | | | | ||||||
| Current Consumption | <60mA @ 12 VDC | | | | | | | ||||||
| Connector | Industrial Standard M12 Connector | | | | | | | ||||||
| Weight | 73.5g | | | | | | | ||||||
| Dimension | 34.3*34.3*38.5mm | | | | | | | ||||||



